The following steps need to be performed before starting the Triple Leaf Roots Blower:

1. Verify that the equipment surroundings are safe: Before starting, it is important to ensure that the equipment surroundings are safe and free of blockages and debris, as well as the necessary ventilation and exhaust. Make sure the equipment is grounded and the power supply is stable.
2. Verify that equipment is properly connected: Check that equipment is properly connected to the power supply and control system, and check that piping and valves are properly installed and closed to avoid the risk of air leaks or piping explosions.
3. Check the lubricant level and fluid level: Check whether the oil level and fluid level of the lubrication system and cooling system of the three-leaf Roots blower are normal, to ensure that the equipment is lubricated and cooled as necessary for normal operation.
4. Starting the Commissioning Program: Starting the commissioning program will set the RPM, turn on the cooling water and lubricating oil, and monitor the operation and parameters of the equipment. The speed should be increased gradually to ensure that the impeller and bearings are in proper condition before the unit is fully started.
5. Monitoring the operation: before the three-leaf Roots blower is officially running, you should always monitor the operation of the equipment to ensure that it is running stably and pay attention to any abnormalities. If any abnormality is found, the machine should be stopped immediately to check the problem and make necessary repairs and adjustments.