JTS250 Roots fan slave shaft Changsha Roots fan factory direct sale parts JTS250 slave shaft
Products
JTS250 Roots fan from shaft Changsha Roots fan factory direct sales accessories JTS250 from the installation of the shaft, pressure installation method bearing and shaft for the interference fit, installation should be applied to the inner ring of the bearing. When using the sleeve installation, the casing can be topped on the bearing inner ring end face, with a hand hammer on both sides of the casing in turn, so that the bearing in the shaft slowly and smoothly sliding. The hardness of the casing should be lower than the hardness of the inner ring, the inner diameter is slightly larger than the diameter of the shaft, and the wall thickness is about 2/3~4/5 of the thickness of the inner ring of the bearing.For small-sized bearings, the inner ring of the bearing can also be tapped with a hand hammer and a copper rod, but the bearing shall not be tapped directly with a hand hammer. In addition, in order to facilitate the inspection of the bearing type, the end with the type marking should be turned outward.
Learn more about Roots Blower JTS250 more accessories click:https://csroots.cn/products/info/391.html
Photo Gallery
Questions and comments
| prices | |
| performances | |
| mass (in physics) | |
| aftermarket | |
| Average (90 points) | |
Loading, please wait 
|
|
One comment