in usingMeltblown Fabric Roots BlowerBefore the first need to understand some common sense in the use of the process, so that you can better use the meltblown cloth Roots fan, the following meltblown cloth Roots fan editor to take you to understand.
1, pressure stability: good running balance performance, high mechanical precision, running part of the parts of the extremely precise balance design, testing, calibration, so the vibration rate is extremely low, we have been through the water treatment, plating treatment examples of applications to prove that the mixing is uniform, the water wave tumbling height.
2, ultra-low noise: low-noise direct drive, outlet and inlet are built-in silencer filter, meltblown fabric fan can greatly reduce the noise of the operation; according to customer demand, can be upgraded to silent operation to meet customer requirements.
3, energy saving and environmental protection: high-pressure fan and Mercedes-Benz car drums with the same ADC12 material, across the cast pig iron old process, and the impeller and other parts do not produce any contact, no oil pollution, with “high, fine, light” and other characteristics.
4, wide range of applications: high-pressure fan at the same time using 50/60Hz wide frequency motor, according to the different needs of customers, the use of different voltage specifications; high-pressure fan is divided into large air volume and high pressure series, so that the customer in the choice of more flexible.
5, simple maintenance: in addition to the impeller, high-pressure fan has no other moving parts, and the impeller is directly connected to the motor, no gears and drive belts, so the reliability is higher, almost maintenance-free, saving a lot of running and maintenance costs.
6, with blowing suction dual function, a machine dual-use, can be used to suck the wind, can also be used to blow the wind;
7、Oil-less or oil-free operation, the output air is clean
8, relative to the centrifugal fan and medium pressure fan, its pressure is much higher, often centrifugal fan of more than ten times;.;
9, if the pump body is the whole die-casting, and the use of anti-vibration mounting feet, then it is also very low requirements for the installation of the foundation, and even can not be fixed feet can be normal operation, very convenient, but also very save the installation costs and installation cycle.
10, relative to similar fans, the operation of the noise is lower, such as the Division I launched a super-quiet vortex fan:
11, maintenance-free use; its wear and tear is only two bearings, in the warranty period, basically do not need maintenance.;
12, vortex blower mechanical wear and tear is very small, because in addition to bearings, no other mechanical contact parts, so, of course, the service life is also very long, as long as it is in the normal conditions of use, 3 to 5 years is no problem at all.;
13, Easy to install, easy to use!
14, the whole is made of aluminum alloy, the motor is explosion-proof motor, there will never be the phenomenon of friction sparks, the use of more assured, better explosion-proof performance.