Roots BlowerIn the process of installation of those safety matters need to be understood? On this issue Roots blower small editor to take you to understand.
1. Carefully read the instruction manual and product samples of Roots blower, familiarize yourself with the specifications, forms, impeller rotation direction and airflow in and out direction of the Roots blower, etc.; check whether the parts of the Roots blower are intact or not, or it should be repaired before installing and using.
2. The Roots blower is installed with safety devices to prevent accidents and is installed and wired by professionals familiar with the relevant safety requirements.
3. The air ducts connecting the import and export of the Roots blower are supported separately, and the overlapping weight of the ducts is not allowed to be added to the components of the blower; when installing the Roots blower, attention should be paid to the horizontal position of the blower, and the combination of the blower and the foundation with the air ducts should be adjusted so that they naturally coincide with each other, and they shall not be forcibly coupled.
4. After the installation of the Roots blower, the hand or lever toggle the impeller, check whether there is excessive tightness or rubbing phenomenon, there is no obstacle to the rotation of the items, no abnormal phenomena, before the test run, the exposed part of the Roots blower drive should be protected, such as Roots blower inlet does not take over the pipeline, but also need to be added to the protective net or other mounting devices.
5. The electric control box of the Roots blower is matched with the corresponding fan (referring to power, voltage, pneumatic mode, control form, etc.).
6. Roots blower wiring should be wired by a professional electrician, wiring is correct and reliable, especially at the electronic control box wiring number and fan terminal number consistent correspondence, Roots blower shell should be reliably grounded, grounding is reliable, can not be used instead of grounding zero.
7. After the Roots blower is fully installed, the inside of the blower should be inspected for any tool box debris left behind.