Roots BlowerIn the use of the process can not be separated from the maintenance, then about the Roots blower maintenance details are what? Roots blower small editor to take you to understand.
Roots blower normal labor, it is strictly prohibited to close the exhaust port valve, overloading is strictly prohibited, the aeration tank of sewage, the amount of oil storage is lower than the nominal amount of scale line, the barometer without pressure, oil drop nozzle without oil drop is strictly prohibited from running. Daily inspection of the oil tank oil storage, oil drops, each drip nozzle per minute control in 20-25 drops, too much oil drops, oil is easy to spray into the sewage tank to occur consumption, too little easy to occur noise and cause mechanical fever cylinder.
Before the use of the new machine or downtime for more than 7 days, must remove the air filter, to the host injected a small amount of lubricant, manually rotate the host pulley, running freely before putting into use. Roots blower new machine must be used for the first 240 hours to change the lubricating oil, after the discovery of high quality blackened, thickened must be replaced in a hurry lubricating oil. Replacement: open the oil tank oil hole cover, remove the oil supply filter element, and scrub the filter element, in order to make the residual oil quickly all outflow. Please use the hand pressure blower fire air compressor to blow out the residual oil against the refueling port, and at the same time, scrub the oil drip nozzle.
Usually check whether there is no air leakage, oil leakage phenomenon, dismantling fan, should be measured with the size of the implementation, make a record, and make a good mark on the parts, in order to ensure that equipped to maintain the original with the requirements, care and inspection should be based on the detailed use of the development of accurate track system, proposed Roots blower overhaul once a year, the replacement of lubricating oil and related wearing parts.
Roots fan normal labor, it is strictly prohibited to close the air inlet and exhaust port valve, should pay attention to the regular watching pressure conditions, overloading the safety valve whether the behavior of the exhaust, or should be adjusted to the safety valve in a hurry, prohibit overloading operation. Due to the characteristics of the Roots fan, should not be allowed to exhaust gas for a long time directly back into the inlet of the Roots fan, otherwise it will affect the safety of the machinery, such as the need to use the reflux adjustment, it must be used to choose the cooling countermeasures.