with regards toRoots FansHow can we ensure that it works properly? What are the conditions that need to be met first? On this issue Roots fan editorial take you to understand.
1, the conveying medium into the steam temperature is usually not greater than 40 ℃.
2, the content of particles in the medium shall not exceed 100mg/m3, the maximum size of particles shall not exceed half of the minimum working gap.
3. The temperature of the bearings in operation shall not be higher than 95℃, and the temperature of the lubricating oil shall not be higher than 65℃.
4, the use of pressure shall not be higher than the nameplate specified in the ascending range.
5, Roots blower impeller and casing, impeller and side plate, impeller and impeller clearance in the factory has been adjusted, re-assembly to ensure that the clearance.
6. When the Roots blower is running, the oil level of the main oil tank and the secondary oil tank must be between the two red lines of the oil level meter.
7, check the import and export joint parts have not forgotten to fasten the place, piping support parts are complete. Blowers and vacuum pumps that need cooling water should check whether the installation of cooling water meets the requirements.
On the “Roots fan work needs to meet the conditions” small make up for you here, if you still want to know more about the Roots fan common sense you can log on to our website to consult the understanding.