Roots FansNeed to debug before use, then what is the specific debugging method? On this issue Roots fan editorial take you to understand.
1、Check the fastening of each part and the positioning pin for looseness.
2. No oil leakage inside the body.
3. There should be no scaling, rusting or peeling inside the body.
4, pay attention to the lubrication and heat dissipation situation is normal, pay attention to the quality of the lubricant.
5, drum attention to intake and exhaust pressure, bearing temperature and motor current increase trend, to determine whether the machine is running normally.
6, before disassembling the machine, the machine should be with the size of the measurement, make a good record, and make a good mark on the parts to ensure that the assembly to maintain the original fit requirements.
7, the oil tank should be cleaned and put into operation according to the use of the steps, it is recommended that all lubricants be replaced after 8 hours of operation.
8, maintenance and overhaul should be based on the specific use of the development of a reasonable maintenance system, carried out on a regular basis, and records, it is recommended to overhaul once a year, and the replacement of bearings and related wear parts.
9. Major repairs are recommended to be carried out by professional maintenance personnel.
On the “Roots fan before the use of debugging” Roots fan editor will introduce you here, if you still have questions you can visit our website to consult the understanding.