talcRoots FansWhat can you do to maximize efficiency in the process of using it? The following editorial will take you through 4 aspects.
1, conveying medium
Lime kiln produced by the CO2 and other mixed gases into the equipment before the first effective cooling dust removal facilities to ensure that the gas when entering the fan, so as to avoid the kiln temperature is too high or the dust content is too large, will lead to internal friction fan (such as the impeller and the impeller, impeller and the casing, impeller and the wall plate, etc.) or jamming, and shorten its service life or cause damage to the parts.
2. Downtime maintenance aspects
Roots blower if a longer period of downtime without using, after the shutdown, should immediately remove the impeller and other rotating parts of the dirt and rust, cleaned with diesel fuel, and in the inner wall of the casing, the impeller surface and other rotating parts of the grease coated with rust; during the shutdown period, each shift disk car twice, to prevent the removal of all the dirt or rust jamming the impeller.
3. Restarting aspects
Before using it again, first manually disk the pulley or coupling for a few weeks to ensure that the fan rotates flexibly before starting it normally.
4. Malfunction maintenance aspects
If the Roots fan has a large failure and must be disassembled and repaired, it should be carried out by a professional and the maintenance personnel should be contacted in time to deal with it.