For Calcium CarbonateRoots FansWhat do you need to pay attention to in the process of use? The following Roots fan editorial take you to understand.
1, calcium carbonate special Roots fan start-up and shutdown before opening the air release valve to ensure that the Roots fan in a no-load state start and shutdown. Pay attention to the observation during the production process, the current should not exceed the rated current of the motor.
2, Roots fan every 12 hours of operation water flushing, 40 cubic blower water consumption of 10 liters, 60 cubic blower appropriate increase in the amount of flushing water. (Flushing water, hot water is better)
3, Roots fan running 5-7 days to adjust the tightness of the triangle belt (tightening. The belt is too loose will lead to insufficient air volume, motor and fan easy to damage) running 1 month and then adjusted.
4, calcium carbonate special Roots fan running 1 month after the replacement of new oil, and then replaced every 3 months. The amount of oil injection is between the red dot in the middle of the oil mark and the upper edge.
5, water-cooled Roots fan must be installed with circulating water, the water temperature can not be higher than 25 degrees, to ensure smooth water flow.
6, vacation before production stops, the first water flushing once, no-load operation for 10 minutes (drying fan internal moisture), and then kerosene 2 times flushing (such as no kerosene, can be used to dilute diesel oil with gear oil flushing), during the vacation fan will not be rusted internally, to ensure that the next fan can be operated normally.